Hi Linkon,
As per your posts regarding Buy/sell conditions (3 buy conditions & 3 shorts), I have modified your afl with Buys, shorts and Stops which can be seen in AA.
Also check out the parameters.
Kindly advise if everything is okay regarding levels etc which we can modify if necessary.
also see if the conditions of entry triggers and stops are correct.
kindly also see the R!, R2 R3 parts if correct
many thanks - see attached
vinod, few suggestions from me
condition 1: CCI hook should be at bottom and start going up
bCond1=Flatbb && Green && C>bb20225b && Ref(Cross(bb20225b,C),-1) && Ref(Red,-1) && CCI(14)>Ref(CCI(14),-1);
may be modified as
bCond1=Flatbb && Green && Ref(Cross(L,bb20225b),-1) && Ref(Red,-1) && CCI(14)>Ref(CCI(14),-1) && CCI(14) < -150;
we are in flat bb, current bar is green , prev bar has pierced bb20225bottom and is red and cci hook at bottom started going up. i removed current c>bb20225b as we could still buy even below the band , and cci value should be around -200.
cci -150 could be a parameter. same thing on short side, it will be +150
bcond2=upbb && Green && CCI(14)>Ref(CCI(14),-1) && C>bb201;
may be modified as
bcond2=upbb && Green && CCI(14)>Ref(CCI(14),-1) && Cross(L,bb201);
we buy when slope is above 30 degrees, current candle pierced bb201 top. close is always above bb201 top (in the channel), but we need cross-over
i may be wrong, i am also learning from this thread only