BollingerWorm !!!

Do you feel BolligerWorm better than BollingerBand?

  • YES

    Votes: 73 70.2%
  • NO

    Votes: 31 29.8%

  • Total voters
    104

columbus

Well-Known Member
1.Use standard Bollinger Bands ,that is, bb(s,20,2).

2.Use ema2-HIGH and ema2-LOW to outline the body of the worm.

3.If the body comes out of bands & re-enters ,then make an ENTRY.

4.The EXIT is, if body comes out the other band and re-enters the body.

5.In case of extreme Bullishness/extreme Bearishness another
pair is used pertaining to BB(20,1) or just for guidance in normal case also.

6.If candles are sandwiched between UPPER bands / LOWER bands
[BB(20,2) and BB (20,1)] ride the trend ,till Reversal is established.
[Both ema-2H and ema-2L are cut by BB(20,1)]




One of the bad days as far as Volatility is concerned.
In the above chart first 3 candles are removed.So data from 0930 onwards
is plotted.Data is confined to 30 points ,from 5660~5630.
 

columbus

Well-Known Member
1.Use standard Bollinger Bands ,that is, bb(s,20,2).

2.Use ema2-HIGH and ema2-LOW to outline the body of the worm.

3.If the body comes out of bands & re-enters ,then make an ENTRY.

4.The EXIT is, if body comes out the other band and re-enters the body.

5.In case of extreme Bullishness/extreme Bearishness another
pair is used pertaining to BB(20,1) or just for guidance in normal case also.

6.If candles are sandwiched between UPPER bands / LOWER bands
[BB(20,2) and BB (20,1)] ride the trend ,till Reversal is established.
[Both ema-2H and ema-2L are cut by BB(20,1)]

 

columbus

Well-Known Member
1.Use standard Bollinger Bands ,that is, bb(s,20,2).

2.Use ema2-HIGH and ema2-LOW to outline the body of the worm.

3.If the body comes out of bands & re-enters ,then make an ENTRY.

4.The EXIT is, if body comes out the other band and re-enters the body.

5.In case of extreme Bullishness/extreme Bearishness another
pair is used pertaining to BB(20,1) or just for guidance in normal case also.

6.If candles are sandwiched between UPPER bands / LOWER bands
[BB(20,2) and BB (20,1)] ride the trend ,till Reversal is established.
[Both ema-2H and ema-2L are cut by BB(20,1)]


 

columbus

Well-Known Member
did you notice today that 20MA was actually outside BB(20,2) for quite a while?? Of course, it re-enters the band eventually.
Hi TP,

This is impossible to happen.The reason is the bands are nothing but 20SMA plus Some positive value.If it happens again ,just remove 20sma study and add it again.
 

columbus

Well-Known Member
I wondered about it too. The next time I notice it, I will take a snapshot and post.
Long back, it happened in my case also.It should not happen.I deleted it and
added it.Every thing was alright.May be the reason WRONG PLOTTING OF sma-20.
 

columbus

Well-Known Member
1.Use standard Bollinger Bands ,that is, bb(s,20,2).

2.Use ema2-HIGH and ema2-LOW to outline the body of the worm.

3.If the body comes out of bands & re-enters ,then make an ENTRY.

4.The EXIT is, if body comes out the other band and re-enters the body.

5.In case of extreme Bullishness/extreme Bearishness another
pair is used pertaining to BB(20,1) or just for guidance in normal case also.

6.If candles are sandwiched between UPPER bands / LOWER bands
[BB(20,2) and BB (20,1)] ride the trend ,till Reversal is established.
[Both ema-2H and ema-2L are cut by BB(20,1)]


 

columbus

Well-Known Member
1.Use standard Bollinger Bands ,that is, bb(s,20,2).

2.Use ema2-HIGH and ema2-LOW to outline the body of the worm.

3.If the body comes out of bands & re-enters ,then make an ENTRY.

4.The EXIT is, if body comes out the other band and re-enters the body.

5.In case of extreme Bullishness/extreme Bearishness another
pair is used pertaining to BB(20,1) or just for guidance in normal case also.

6.If candles are sandwiched between UPPER bands / LOWER bands
[BB(20,2) and BB (20,1)] ride the trend ,till Reversal is established.
[Both ema-2H and ema-2L are cut by BB(20,1)]